Home > Product Lines > Polymer materials
They are screen printable(250 mesh or higher) and thermal curable coating designed for insulator for chip-resistor,
showing low coefficient of thermal expansion, good humidity resistance, and good heat resistance.
◆Specifications
Product DC-130S Test method
Color BLACK With naked eye
Viscosity @25℃ 130 ± 20 kcps Brookfield HB-DVⅡ
SC4-14 @25±0.5℃,10rpm
Thixotropic index 2.0 ± 0.5 10 rpm/100 rpm
Pencil Hardness above 4H Using the wood pencil
(3H, 4H, 5H)
Acid Resistance above 4H H2SO4 5% * 4HR
Pot Life 10 day @40℃ -
Dry condition 180℃ - 5min -
Cure condition 200℃ - 30min -
· GIN-COAT 5480
GIN-COAT 5480 is a type of molding epoxy resin applicable for electronic parts.
It has no air bubbles, and has exellences in water-proof, thermal shock.
It receives the certification of UL-94-V-0 level from UL. (File No. E102800)
Applications
Properties
GIN-COAT 5480
RESIN HARDNER
DC-5480 DH-5480
APPEARANCE PASTE LIQUID TYPE
VISCOSITY (CPS,25 ℃ ) 8,000-12,000 200-300
MIX PROPORTION 100 37
HARDENING CONDITION 90℃× 3 hour
KNOCKDOWN TIME(25℃) 6 hour
INSULATION FRACTURE VOLTAGE 18kv/mm
VOLUME RESISTANCE 1.0 × 1015 Ω cm
DIELECTRIC CONSTANT (%) 4.0 (20 ℃ /30KHz)
DIELECTRIC FACTOR (%) 0.01 (20 ℃ /30KHz)
INFLAMMABILITY UL94V-O (File No.E102800)
· GIN-COAT 506 & 588
GIN-COAT 506 is a type of epoxy resin that does not contain filler for molding.
It is composed of two liquid ones, showing exellence in electrical and mechanical properties.
GIN-COAT 588 is a type of molding epoxy resin for electronic parts. It has exellences in moisture resistance,
impact resistance, easy-defoamation during drying.
Applications - MODLING FOR ELECTRONIC PARTS
Properties
GIN-COAT 506
RESIN HARDNER
DC-506BK DH-506
APPEARANCE LIQUID LIQUID
VISCOSITY (CPS,25 ℃ ) 400-600 50
MIX PROPORTION 100 37
HARDENING CONDITION 20-25℃×48 hour
100℃×40 min
KNOCKDOWN TIME(25℃) 2 hours
INSULATION FRACTURE VOLTAGE 18KV/mm
VOLUME RESISTANCE 1.0×10 14 Ωcm
DIELECTRIC CONSTANT (%) 4.0(20℃/30KHz)
DIELECTRIC FACTOR (%) 0.01(20℃/30KHz)
INFLAMMABILITY  
· GIN-COAT 525SVO
GIN-COAT 525SVO is a type of epoxy resin for SPRAY COATING applicable to electronic parts like MAGNETICRING CORE.
According to working condition, required thickness is able to be controlled. It shows exellence in electrical properties and adhesion.
It receives the certification of UL-94-V-0 level from UL. It does not contain halogen substance as an eco friendly good.
Applications - CORE SPRAY COATING EPOXY RESIN
Properties
GIN-COAT 525SVO
RESIN HARDNER DILUENT
DC-525SVO(5780) DH-515SPC DT-5780
APPEARANCE LIQUID LIQUID LIQUID
MIX PROPORTION 100 10 20-30
VISCOSITY (CPS,25 ℃ ) 1,500-3,500
HARDENING CONDITION 100℃×40 min
KNOCKDOWN TIME(25℃) 2 hours
METHOD Spray Coating
SHELF LIFE 6 months, 25℃ at cold & dark place
COLOR ASSIGNED COLOR
INFLAMMABILITY UL94V-O(File No.E102800)
· GIN-COAT DA-1010SF
GIN-COAT DA-1010SF is a type of adhesive for electronic parts core molding. According to working condition, wanted film thickness is acquired. It has exellence in electronic properties and adhesion.
Applications - INDUCTOR COIL WIRE ADHESIVE, INDUCTOR SIDE ADHESIVE, CORE ADHESIVE
Properties
GIN-COAT DA-1010SF
APPEARANCE BLACK COLOR LIQUID
VISCOSITY (CPS,25 ℃ ) 35000
HARDENING CONDITION 250℃×1 MIN
TIME FOR GELATINIZING 1 HOUR (150℃)
SHELF LIFE 4 MONTHS, LESS THAN 5℃ IN DARK PLACE
 
· LED Display
GIN-COAT 5270SDA/DIS is a kind of epoxy resin for LED display applications. Under 80℃ temperature it is gelatinized in short time.
Hardened film shows excellence in physical properties like tensile strength, plasticity, adhesion.
Also it has superiority in beam transmittance rate, wet-proof, and thermal shock.
Applications - EPOXY FOR LED DISPLAY
Properties
SPEC DC-5270SDA DA-5270DIS REMARK
VISCOSITY 25℃ 850~1,300 100~140 Brookfield Model RVFZ
@25 ℃± 0.5
SPECIFIC GRAVITY g/cc 1.17 1.17 Mass cylinder
MIX PROPORTION wt% 100 100 wt% resin & hardner
GRAVITY AFTER MIXTURE   150~350 100 / 100 wt%
KNOCKDOWN TIME hour 6 ROOM TEMPERATURE
HARDNESS Shore D 84  
HARDNING
CONDITION
℃ * time 80 ℃ * 3 hour  
GLASS TRANSITION
TEMPERATURE (Tg)
> 80 DSC Method
BEAM
TRANSMITTANCE
% > 90 500 ∼ 700 nm
· LED LAMP
GIN-COAT 5260 is a kind of epoxy resin for LED LAMP molding. It is gelatinized in short time under the drying condition of over 120℃
Hardened film shows excellence in physical properties like tensile strength, plasticity, adhesion.
Also it has superiority in beam transmittance rate, wet-proof, and thermal shock.
It does not generate bubble even in the condition of high temperature curing.
Applications - EPOXY FOR LED LAMP MOLDING
Properties
SPEC DC-5260 DH-5260 REMARK
VISCOSITY 25℃ 2.500~3.500 100~140 Brookfield Model RVFZ
@25 ℃± 0.5
SPECIFIC GRAVITY g/cc 1.17 1.17 Mass cylinder
MIX PROPORTION wt% 100 100 wt% resin & hardner
GRAVITY AFTER MIXTURE   400~600 100 / 100 wt%
KNOCKDOWN TIME hour 6 ROOM TEMPERATURE
HARDNESS Shore D 85  
HARDNING
CONDITION
℃ * time 125 ℃*1 hour+De-mold + 125 ℃* 3 hour  
GLASS TRANSITION
TEMPERATURE (Tg)
> 125 DSC Method
BEAM
TRANSMITTANCE
% > 90 500 ∼ 700 nm
· OUT-DOOR HIGH POWDER L.E.D LAMP (UV Resistance)
GIN-COAT 5260-OT is a kind of epoxy resin for HIGH POWER LED LAMP.
Hardened film shows excellence in wetproof, thermal shock, tensile strength, plasticity, and adhesion.
It has more than 98% beam transmittance rate and blocks ultraviolet rays.
It does not generate bubbles even under hardening condition of over 120℃ in short time.
Applications - LED LAMP FOR OUTDOOR DISPLAY, EPOXY FOR LED LAMP
Properties
SPEC DC-5260-OT DH-5260-OT REMARK
VISCOSITY 25℃ 2.500~3.500 100~140 Brookfield Model RVFZ
@25 ℃± 0.5
SPECIFIC GRAVITY g/cc 1.17 1.17 Mass cylinder
MIX PROPORTION wt% 100 100 wt% resin & hardner
GRAVITY AFTER MIXTURE   400~600 100 / 100 wt%
KNOCKDOWN TIME hour 6 ROOM TEMPERATURE
HARDNESS Shore D 85  
HARDNING
CONDITION
℃ * time 125 ℃*1 hour+De-mold + 125 ℃* 3 hour  
GLASS TRANSITION
TEMPERATURE (Tg)
> 125 DSC Method
BEAM
TRANSMITTANCE
% > 90 500 ∼ 700 nm
· COLORING (DCL-5270 SERIES)
Applications - COLORING FOR LED DISPLAY & LAMP
Properties
COLOR MODEL VISCOSITY (cps)
GREEN PIGMENT DCL-5270 GR 4,200 ~ 4,800
RED PIGMENT DCL-5270 RD 4,200 ~ 4,800
YELLOW PIGMENT DCL-5270 YL 4,200 ~ 4,800
BLUE PIGMENT DCL-5270 BL 4,000 ~ 5,000
APPEARANCE COLORED PASTE
PACKAGE 1kg IN PLASTIC CONTAINER
· LIGHT DIFFUSING (DF-5270 SERIES)
It is a kind of light dispersant for LED DISPLAY & LAMP. It helps emitting light to be dispersed in DIODE.
Applications - LIGHT DISPERSANT FOR LED DISPLAY, LAMP
Properties
  UNIT SPEC
APPEARANCE   WHITE PASTE
VISCOSITY cps 9,000 ~ 15,000
DIAMETER OF SiO₂ um 3~5 um
· PHOTODIODE T/R Remote Con. Sensor LAMP
GIN-COAT 5275 & 5280 are a kind of epoxy resin for LED LAMP requiring filter function of cut-off in ultraviolet area around 750nm, 810nm.
Applications - EPOXY FOR PHOTO DIODE TRANSISTOR REMOTE CONTROLLER SENSOR (750nm, 810nm cut/off)
Properties
SPEC DC-5275 DH-5275 DC-5280 DH-5280 REMARK
VISCOSITY 25℃ 3.000~5.000 90~110 3,000 ~ 5,000 90 ~ 110 Brookfield Model RVF@25 ℃± 0.5
SPECIFIC GRAVITY g/cc 1.17 1.17 1.17 1.17 Mass cylinder
MIX PROPORTION wt% 100 100 100 100 wt% RESIN & HARDNER
VISCOSITY AFTER MIXTURE   400~600 400 ~ 600 100 / 100 wt%
KNOCKDOWN TIME hour 6 6 ROOM TEMPERATURE
HARDNING
CONDITION
℃ * time 125 ℃*1 hour+De-mold + 125 ℃* 3 hour 125℃*1 hour + De-mold + 125℃*3 hour  
BEAM
TRANSMITTANCE
% 0 (750 nm cut-off) 0 (820 nm cut-off) Below IR region
· HIGH Tg L.E.D LAMP DC/DH-5265
GIN-COAT 5265 is a kind of epoxy resin for LED LAPS mold type. It shows improvements in heat resistance & Tg as XY reisn.
The hardened film shows exellence in tensile strength, hardness, beam transmittance, water-proof, thermal shock.
Applications - EPOXY RESIN FOR HIGH Tg LED LAMP
Properties
SPEC DC-5265 DH-5265 REMARK
VISCOSITY 25℃ 8,000~12,00 150~250 Brookfield Model RVFZ
@25 ℃± 0.5
SPECIFIC GRAVITY g/cc 1.17 1.17 Mass cylinder
MIX PROPORTION wt% 100 100 wt% resin & hardner
GRAVITY AFTER MIXTURE   1,000~2,000 100 / 100 wt%
KNOCKDOWN TIME hour 6 ROOM TEMPERATURE
HARDNESS Shore D 80~90  
HARDNING
CONDITION
℃ * time 125 ℃*1 hour+De-mold + 125 ℃* 3 hour  
GLASS TRANSITION
TEMPERATURE (Tg)
> 145 DSC Method
BEAM
TRANSMITTANCE
% > 95 500 ∼ 700 nm
· PHOSPHOR BINDER DC/DH-530
GIN-COAT 530 is a kind of epoxy resin developed for PHOSPHOR BINDER.
Applications - EPOXY RESIN FOR PHOSPHOR BINDER
Properties
SPEC DC-530 DH-530 REMARK
VISCOSITY 25℃ 13,000~17,000 150~250 Brookfield Model RVFZ
@25 ℃± 0.5
SPECIFIC GRAVITY g/cc 1.17 1.17 Mass cylinder
MIX PROPORTION wt% 100 100 wt% resin & hardner
VISCOSITY AFTER MIXING   2,500~3.500 100 / 100 wt%
KNOCKDOWN TIME hour 6 ROOM TEMPERATURE
HARDNESS Shore D 85  
HARDNING
CONDITION
℃ * time 125 ℃*1 hour+De-mold + 125 ℃* 3 hour  
GLASS TRANSITION
TEMPERATURE (Tg)
> 140 DSC Method
BEAM
TRANSMITTANCE
% > 90 500 ∼ 700 nm
· UV LED DC/DH-5300
GIN-COAT 5300 is a kind of epoxy resin developed for UV LED.
Applications - EPOXY RESIN FOR UV LED
Properties
SPEC DC-5300 DH-5300 REMARK
VISCOSITY 25℃ 8,000~10,000 150~250 Brookfield Model RVFZ
@25 ℃± 0.5
SPECIFIC GRAVITY g/cc 1.17 1.17 Mass cylinder
MIX PROPORTION wt% 100 100 wt% resin & hardner
VISCOSITY AFTER MIXING   2,500~3.500 100 / 100 wt%
KNOCKDOWN TIME hour 6 ROOM TEMPERATURE
HARDNESS Shore D 90  
HARDNING
CONDITION
℃ * time 125 ℃*1 hour+De-mold + 125 ℃* 3 hour  
GLASS TRANSITION
TEMPERATURE (Tg)
> 150 DSC Method
BEAM
TRANSMITTANCE
% > 90 500 ∼ 700 nm